- The square drive slides along the handle so it can be set to any position.
- When used as an L-shaped wrench, it is easier to apply force by pulling toward you, so after rotating 180 degrees, slide the handle and pull again to use.
- When used as a T-shaped wrench, place the square drive at the center of the handle and operate with both hands. To make a T-shaped wrench with a longer shaft, connect an extension bar.
| Specification | Details |
|---|---|
| Product number | 220 |
| Insertion angle dr. (mm) | 9.5 (3/8″) |
| Dimensions (mm) D | 11.0 |
| Dimensions (mm) H | 20.6 |
| Dimensions (mm) L | 200.0 |
| Quantity per package (normal) | 10 |
| Quantity per package (decorative specifications) | 6 |
| Mass (g) | 190 |
Do not use with extension pipe etc.
Avoid giving shock by hitting with hammer etc.
Insert square drive positively to the bottom.
Reviews
There are no reviews yet.