| Model | Tapping / Drilling capacity | Jacobs chuck / Spindle morse taper | Free speed | Overall length | Mass | From center to outside | Feed length / Spindle offset | Max. output | Air inlet thread | Hose size | Average air consumption | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | in | min-1 | mm | in | kg | lb | mm | in | mm | in | kw | ps | Rc or NRT | mm | in | m³/min | ft³/min | ||
| Drills (Non Reversible Type) | |||||||||||||||||||
| The compact designed drills assure best possible drilling performance. | |||||||||||||||||||
| NRD-6SA | 6.5 | ¼ | No.1 | 2800 | 166 | 69/16 | 0.8 | 1.8 | – | – | – | – | 0.4 | 0.54 | ¼ | 6.3 | ¼ | 0.5 | 17.7 |
| NRD-6SA(T) | 6.5 | ¼ | ⅜-24UNF | 2800 | 166 | 69/16 | 0.8 | 1.8 | – | – | – | – | 0.4 | 0.54 | ¼ | 6.3 | ¼ | 0.5 | 17.7 |
| NRD-6PB | 6.5 | ¼ | No.1 | 2400 | 150 | 5⅞ | 0.8 | 1.8 | – | – | – | – | 0.4 | 0.54 | ¼ | 6.3 | ¼ | 0.5 | 17.7 |
| NRD-6PB(T) | 6.5 | ¼ | ⅜-24UNF | 2400 | 150 | 5⅞ | 0.8 | 1.8 | – | – | – | – | 0.4 | 0.54 | ¼ | 6.3 | ¼ | 0.5 | 17.7 |
| NRD-10P | 10 | ⅜ | No.2S | 2000 | 155 | 6⅛ | 1.1 | 2.4 | – | – | – | – | 0.44 | 0.6 | ¼ | 9.5 | ⅜ | 0.55 | 19.4 |
| NRD-10P(T) | 10 | ⅜ | ⅜-24UNF | 2000 | 155 | 6⅛ | 1.1 | 2.4 | – | – | – | – | 0.44 | 0.6 | ¼ | 9.5 | ⅜ | 0.55 | 19.4 |
| NRD-12PA | 13 | ½ | No.6 | 1500 | 187 | 7⅜ | 2.6 | 5.7 | – | – | – | – | 0.71 | 0.97 | ¼ | 9.5 | ⅜ | 0.65 | 23 |
| NRD-12PA(T) | 13 | ½ | ½-20UNF | 1500 | 187 | 7⅜ | 2.6 | 5.7 | – | – | – | – | 0.71 | 0.97 | ¼ | 9.5 | ⅜ | 0.65 | 23 |
| Drills (Reversible Type) | |||||||||||||||||||
| These reversible drills are preferred in industry and assembly line. | |||||||||||||||||||
| NRD-14R | 14 | 9/16 | 1 | 1100 | 438 | 17¼ | 5.3 | 11.7 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-14LRLW | 14 | 9/16 | 1 | 1100 | 438 | 17¼ | 5.3 | 11.7 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-16R | 16 | ⅝ | 2 | 900 | 452 | 17¾ | 5.5 | 12.1 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-16LRLW | 16 | ⅝ | 2 | 900 | 452 | 17¾ | 5.5 | 12.1 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-19R | 19 | ¾ | 2 | 750 | 452 | 17¾ | 5.5 | 12.1 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-19LRLW | 19 | ¾ | 2 | 750 | 452 | 17¾ | 5.5 | 12.1 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-22R | 22 | ⅞ | 2 | 600 | 452 | 17¾ | 5.5 | 12.1 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-22LRLW | 22 | ⅞ | 2 | 600 | 452 | 17¾ | 5.5 | 12.1 | 39 | 19/16 | 60 | 2⅜ | 1.11 | 1.51 | ⅜ | 12.7 | ½ | 1.1 | 38.8 |
| NRD-23R | 23 | ⅞ | 2 | 500 | 353 | 13⅞ | 10.5 | 23.1 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| NRD-23LRLW | 23 | ⅞ | 2 | 700 | 353 | 13⅞ | 10.5 | 23.1 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| NRD-25R | 25 | 1 | 3 | 400 | 353 | 13⅞ | 10.3 | 22.7 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| NRD-25LRLW | 25 | 1 | 3 | 570 | 353 | 13⅞ | 10.3 | 22.7 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| NRD-28R | 28 | 1⅛ | 3 | 350 | 353 | 13⅞ | 10.3 | 22.7 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| NRD-28LRLW | 28 | 1⅛ | 3 | 450 | 353 | 13⅞ | 10.3 | 22.7 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| NRD-32LR | 32 | 1¼ | 3 | 270 | 353 | 13⅞ | 10.3 | 22.7 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| NRD-32LRLW | 32 | 1¼ | 3 | 380 | 353 | 13⅞ | 10.3 | 22.7 | 41 | 1⅝ | 100 | 4 | 1.84 | 2.5 | ½ | 12.7 | ½ | 1.4 | 49.4 |
| Tappers | |||||||||||||||||||
| The double button tapper makes tapping work speedy so leaving a fine finish. | |||||||||||||||||||
| NRT-8P | 8 | 5/16 | No.1 | 1700 | 181 | 7⅛ | 1.2 | 2.6 | – | – | 23 | ⅞ | 0.37 | 0.51 | ¼ | 9.5 | ⅜ | 0.55 | 19.4 |
| NRT-10H | 10 | 5/16 | 2S | 350 | 257 | 10⅛ | 2.0 | 4.4 | – | – | 160 | 65/16 | 0.42 | 0.57 | ¼ | 9.5 | ⅜ | 0.6 | 21.2 |
| Product line | |
|---|---|
| Product type |
No products in the cart.
