10L Jerry Can
Best fuel cans in Australia
Pro Quip are the toughest, safest, and most thoroughly tested in Australia and the world. Made in Europe, used by defense, fire and emergency services, government departments and everyday Australians alike. Don’t waste your money on inferior cheap copies that offer only short-cuts in design, quality and finish.
Metal Jerry Fuel Can Features:
- Traditional style closure – WW2 German bayonet design
- Patented secondary locking pin
- 0.9mm cold rolled steel construction
- Heavy duty external powder coating
- Fuel resistant internal coating
- Suitable for use with all pump fuels
- Upright military design is easy to store, easy to pour and easy to handle
- AFAC approved colour for fuel storage identification
- Made in Latvia, Europe
Metal Jerry Can Features:
- Traditional style closure – WW2 German bayonet design
- Patented secondary locking pin
- 9mm cold rolled steel construction
- Two-piece body with recessed central automated weld
- Heavy duty external powder coating
- Fuel resistant internal coating
- Suitable for use with all pump fuels
- Wide mouth breathing channel
- Military spec strip welded triple handle
- AFAC approved colour for fuel storage identification
- Made in Latvia, Europe
- Fits standard jerry can holders
Benefits:
- Tested and certified in Australia, proven in military situations
- Longevity – superior coatings inside and out for extra-long life
- Safety – patented pin prevents closure opening during drop tests
- Fast pouring air flow channel means zero glug smooth pouring
- Upright military design is easy to store, easy to pour and easy to handle
- Matching pourers designed for different tasks available
- Jerry can holders are built to fit this can
- Made in Europe, used by Aussies!
Technical Specifications:
- AS2906:2001 Certified
- ADG Code Compliant – UN 3A1/X/250/YY/D/BAM12276-VP
- “Certified to comply with UN Dangerous Goods Regulations for the handling of dangerous substances of packing group 1 with a density of max 1.2kg/l” allowing transport of dangerous goods by Road (ADR) & Rail (RID), Sea (IMDG) and Air (IATA-DGR)
- AS2700 Colour Coded to AFAC requirements
- Flame tested
- Pressure tested
- Drop tested
- Corrosion resistance tested
- Stack tested
- Component tested
- Handle strength tested
Ideal for storage of up to 10L of Fuel
Empties 10L of fuel in 40 seconds when used with Pro Quip Flexible Unleaded Pourer part 13300
10.5KG weight when filled to nominal capacity with unleaded fuel
Can be stored in any orientation without leaking
Replaceable seal for longer service life
Upright Design to fit standard 10L Jerry Can Holders
Recommendations:
To be stored in a Pro Quip Can Caddy during transport
Service life 20 years
Not for storage of water.
| INDIVIDUAL DIMENSIONS (CM) | 34.5L x 16.5W x 27.5H |
|---|---|
| SIZE (L) | 10 |
| Fuel Type | Unleaded |
| Colour | Red |
| Weight (kg) | 3 |
| Box Qty | 4 |
| BOX DIMENSIONS (CM) | 68 X 36 X 29 |
Safe Refueling tips from Worksafe Victoria
When refueling petrol or diesel powered portable equipment there must be safe systems of work in place to reduce the ignition risk.
These may include:
When Refueling:
- Turn the equipment off and give it time for the hot parts to cool down
- Remove the equipment from inside vehicles
- Remove the equipment from trailers or surfaces (eg plastic or rubber) to ground out any static charge built up on the equipment
- Refuel away from other heat and possible ignition sources
- Refuel in a well-ventilated area
- Do not refuel in low lying areas, where vapours can accumulate
- Refuel only from approved labelled fuel containers
- Use a funnel, to reduce the risk of static electricity and fuel spillage
- Ensure suitable fire extinguishers are readily accessible
- Replace fuel caps on equipment and fuel containers tightly.
For more information from Worksafe Victoria, visit their site.
When Transporting portable equipment and fuel containers:
- Allow the equipment to cool down before loading it onto a vehicle
- Ensure fuel caps are on tight
- Secure in the upright position in a well-ventilated space.
When Storing fuel onsite:
- Only approved labelled fuel containers are used
- Fuel containers are outside vehicles or structures, in a well-ventilated area.
| BRAND |
|---|
Related products
-
-
SCANGRIP DIFFUSER
Select options This product has multiple variants. The options may be chosen on the product page -
-
SCANGRIP Battery for MINISLIM
Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.