Rehobot ® SINGLE STAGE HAND PUMP PH-SERIES

PRODUCT FEATURES

Single stage pumps in the PH series have a simple but functional design. Few moving parts and built-in safety valve ensures the safety of the PH pumps. The PH series are real workhorses that will last for long. All pumps can be equipped with a pressure gauge so that the user can control and monitor the power that the pump generates with great accuracy.

Hand pumps in the PH series are available with 70 or 80 MPa working pressure and with the choice of 600 or 1000 cm3 effective oil capacity. The pumps with 70 MPa working pressure can also be supplied with a pre-assembled 2 meter long hydraulic hose (LS201ES), swivel coupling (ASE10) and quick coupling (AQI7). The names of these kits are PH70A-600/LS201 and PH70A-1000/LS201 respectively.

Advantages:

High oil flow
Limited pump effort required
Aluminium oil container
Cast iron pump housing
User friendly
Simple service
Robust and reliable

Technical tip:

To ensure complete operator safety at all times we recommend the fitting of a pressure gauge (AMT801) with gauge adaptor (AVM204) to this series of hand pumps.
When accessories are selected to a hydraulic system, the working pressure rating for these shall be equal to or higher than the pump unit,s maximum working pressure. For hoses we recommend a 3-4 fold safety margin between the hydraulic system,s maximum operating pressure and the burst pressure of the hose. It is also important to ensure that the pump,s effective oil volume exceeds the total volume of oil in the hydraulic system, preferably with a safety margin of about 20%.

Note:
The hydraulic connection interface on all PH pumps is a G1/4″ threaded port.

Units for meter measurements: