MODEL T

MODELS T-2000 & T-3000 DIGITAL TORQUE TESTERS

For testing impact wrenches, pulse tools and hand torque wrenches.
T-2000 – For square drives up to 1/2″
T-3000 – For square drives up to 3/4″

Impact Wrench’s Torque Tester

Each model features:

• Unique “tuned-beam” design
• State-of-the-art electronics with advanced impulse signal filtering
• Direct, immediate torque readouts
• High accuracy: $ 0.5% or 1 count
• Complete freedom from the joint material/friction variables of standard nut-bolt tightening tests
• Simple operation
• Factory calibration, easily recalibrated
• Rugged construction
• Switchable 110/220 VAC, 60 Hz power
• Impact readout 300 to 1,800 impacts per minute
• Wide-range torque readouts:
• T-2000: 0 to 400 ft.-Ib. or 0 to 550 N.m
• T-3000: 30 to 1,000 ft.-Ib. Or 1,300 N.m

The Highest Standard Yet for Tool Testing with Ease, Accuracy and Consistency.

Now measure impact tool output faster, easier and more accurately than ever. The advanced electronics of S-W Digital Torque Testers produce direct digital torque readings in foot-pounds or Newton meters (N.m). Measurements are consis-tent, repeatable and require less time than traditional testing devices, yet with less margin for operator error.

User benefits include time savings, dependability and increased product quality. Regular tool checks with S-W Digital Torque Testers enable you to identify whether job assembly problems are due to tools or factors such as material variability.

The S-W system also provides a standard and consistent control factor for tool service and repair, which can be maintained across multiple work stations or assembly points.

Indispensable for repairs and maintenance programs in a broad range of industrial applications:

• Automotive, truck or bus maintenance shops
• Appliance assembly operations
• Impact wrench and pulse tool repair facilities
• Any application requiring accuracy checks for all types of hand torque wrenches

Now Measure Impact Tool Performance in Torque

The heart of the S-W Digital Torque Tester system is a “tuned” steel mechanical beam that isolates the power tool impulse – eliminating extraneous signals – for true torque readouts.

The beam in each model is designed to react best to tools that fall within a specific size range. The T-2000 gives realistic readings for smaller tools; the T-3000 is best suited for larger tools. Each model is supplied with three square drive adapters for testing the most common wrench sizes within its optimum size range. (See Table 1.) Changing adapters is simple: remove two screws, remove the adapter, then insert a new adapter, fitting it onto the mating dowel pins. The beam assembly base for ei-ther model requires very little bench space for mounting. (See Table 2.)

The digital meter displays high visibility readouts in three modes: impact tool output, impacts per minute and a “static” setting for testing and calibrating hand torque wrenches.

To operate the test, insert the power tool square drive into the socket at the free end of the beam and operate the tool. The beam senses the tool impulses and transmits a signal to the digital meter. The average peak impulse is converted into a dynamic torque output reading displayed in either foot-pounds or N.m. This true output measurement remains on the display until reset by the operator.

The products shown above are only a small part of series, please contact us for
your enquiry.